Writing
How to Write a Press Release People Actually Read
Short answer
Decide what changed and why a reader should care, put that in a plain headline and a one-sentence lede, back it with checkable facts and one real quote, then add a boilerplate and a contact, and stop.
Key takeaways
- Write the one-sentence version of the news before you write anything else. If you cannot, you do not have a release yet.
- Headline and lede carry the story; the rest of the release is reference material for the reporter.
- In Muck Rack's 2026 survey, 88% of journalists said they immediately disregard pitches that miss their coverage area and 71% reject overly promotional ones.
- A good release is usually 300 to 500 words and has no adjectives that the facts cannot support.
Most press releases fail before anyone reads them. They fail in the subject line, in the first sentence, or in the gap between what the sender thinks is exciting and what a reporter's readers need to know. The fix is not clever writing. It is a short method applied in the right order.
This guide walks through that method. The press release builder follows the same steps, so you can keep it open in another tab and fill it in as you go.
Do you actually have news?
You have news if something changed, it affects people outside your organization, and you can say it in one sentence.
Before you write a word of the release, write this sentence on a scrap of paper: "[Who] [did what] [when], which means [consequence] for [whom]." For example: "Example Public Library will open a 24-hour study room on Dec. 1, which means students and night-shift workers get a quiet place to work after 9 p.m." (The library is fictional.)
If the sentence comes out vague, the release will too. Common signs there is no news yet:
- The change has not happened and has no date.
- The "news" is that you are proud, excited or committed.
- The only people affected work for you.
- Nothing can be counted, priced, visited or tried.
Sometimes the honest answer is to wait until there is a date, a number or a result. A release sent too early teaches reporters to ignore the next one.
How do you write the headline?
State the subject, a concrete verb and the most important specific, in plain words.
The headline does most of the work. It is the subject line of your email, the title in the wire feed and the line in a search result. Write several versions and keep the one a stranger would understand.
| Weak | Stronger |
|---|---|
| Example Library Announces Exciting New Initiative | Example Library Opens 24-Hour Study Room on Dec. 1 |
| Introducing Our Revolutionary Platform | Example Software Cuts Payroll Setup to One Day for Small Clinics |
| Big News for Springfield Families! | Springfield Schools Add Free Breakfast at All 12 Elementary Schools |
Skip exclamation marks, all-caps words and claims like "industry-leading". Check your draft with the headline checker, which shows what survives a 60-character cut. The headline length article goes deeper.
What goes in the first paragraph?
The dateline, then a single sentence containing the whole story.
Open with the city in capitals, the state abbreviation and the date, then a dash: SPRINGFIELD, Ill., Nov. 20, 2026 –. Then the lede. Aim for under 35 words and never more than 45.
The lede should survive being the only sentence published. Read it alone. Does it say who, what and when? Does it hint at why it matters? If yes, move on. The dateline and lede guide has more examples.
What proves the news?
Facts a reporter can check: numbers, dates, prices, places, availability and sources.
The second and third paragraphs answer the questions an editor will ask. How much does it cost? When does it start? How many people are affected? What was there before? Where can readers go?
Keep each paragraph to two or three sentences. Use numerals for numbers, and give the source of any statistic. If a figure comes from your own data, say so. If it comes from a survey, name the survey and the year. Never round a number up because it sounds better.
What you leave out matters as much. Feature lists, company history and the story of how the team came up with the idea usually belong on a fact sheet or your newsroom page, not in the release.
Do you need a quote?
Yes, one, and it should give a reason or a view, not a feeling.
A quote is the only place in a release where a human gets to explain why. Use it for that. "We are thrilled to announce" tells a reporter nothing. "Students told us the hardest hours to find a quiet desk are between 10 p.m. and 2 a.m." gives them a sentence they might use.
The person quoted must be real, named, have a current title and have approved the words. Better still, make that person available for interviews. In Muck Rack's 2026 survey, 58% of journalists said a pitch should offer interview access to relevant sources; only 14% wanted pre-written quotes. The quotes guide covers wording.
How do you finish the release?
Add the boilerplate, a named media contact and the ### end mark.
The boilerplate is your standard About paragraph: what the organization does, for whom, where it is based, one checkable fact and a web address. Write it once with the boilerplate generator and reuse it.
The media contact is a real person with an email address that is read every day, plus a phone number if someone will answer it. Then type ### on its own line. It is a small, old habit that tells readers nothing is missing.
What should you cut before sending?
Every adjective the facts do not prove and every sentence a reporter would never quote.
Do a cutting pass with these questions:
- Does any sentence say the same thing as another one?
- Is there a word like innovative, leading, unique, robust or world-class? Replace it with the fact behind it, or delete it.
- Are there links stuffed with keywords? Google's spam policies list optimized anchor text in press releases distributed on other sites as an example of a link scheme. Link plainly, to the page a reader needs.
- Is any claim unsourced? Source it or remove it.
- Is the release over 700 words? Move detail to a linked page.
Then run the 14-point checklist in the builder, or the longer pre-send checklist.
How do you get it in front of journalists?
Send short personal emails to the few reporters who cover your topic, and post the release on your own site.
A release is a reference document. The email that carries it is the pitch, and it should be shorter than the release. Muck Rack's 2026 survey, drawn from 897 journalist responses, found 62% prefer to be pitched by one-to-one email, 69% prefer pitches under 200 words and 78% want them before noon. Half said one follow-up is ideal, typically three to seven days later.
The same survey shows what kills a pitch: 88% of journalists said they immediately disregard pitches that are irrelevant to their coverage, 71% reject overly promotional ones and 50% are put off by anything that looks like a mass email. A wire service can add reach, and for public companies it can help meet disclosure rules, but it does not replace relevance. Read do you need a wire service and how to write a media pitch email next.
What does a finished release look like?
Ten blocks in a fixed order, about 300 to 500 words.
| Block | Example content (fictional) |
|---|---|
| Release line | FOR IMMEDIATE RELEASE |
| Headline | Example Public Library Opens 24-Hour Study Room at Main Branch on Dec. 1 |
| Subhead | Room seats 60, needs a library card and follows a petition signed by 600 students |
| Dateline + lede | SPRINGFIELD, Ill., Nov. 20, 2026 – Example Public Library will open... |
| Proof | 60 seats, 40 outlets, entry by card, $48,000 first-year budget |
| Quote | Director on why the hours were chosen |
| Detail | Review after six months, numbers to be published |
| Boilerplate | About Example Public Library |
| Contact | Name, press@example.org, phone |
| End | ### |
Load the fictional sample in the press release builder to see it assembled, then replace it with your own news.
Frequently asked questions
What is the purpose of a press release?
To give journalists, and anyone else who needs it, an accurate written record of a piece of news, with the facts, a quote and a contact they can use to report it.
How long should a press release be?
Most news fits in 300 to 500 words. Financial results and complex research can be longer; simple notices can be shorter.
Should a press release be written in the third person?
Yes. Write about the organization by name, not as we, except inside quotes. It reads as reporting and is easier for a journalist to adapt.
Do I need a press release to get coverage?
Not always. Many stories start with a short personal email pitch, and the release serves as the reference document behind it. Muck Rack's 2026 survey found 86% of journalists say at least some of their stories start with a PR pitch.
When is the best time to send a press release?
There is no perfect hour, but morning helps. In Muck Rack's 2026 survey, 78% of journalists said they want pitches before noon, and half said the day of the week does not matter to them.